< All Rigs

P4000 Pump Hoist
The 4,000 Series Pump Hoist consists of a 32 ft. self-supporting mast held by two 3-1/2” x 48” double acting cylinders. This design eliminates the need for guy cables. Maximum layback is 10 ft. The basic rig consists of a 4,000 lb. capacity (2,000 lb. single line), 125 ft. of 3/8” rotation resistant cable, open swage socket with 3 ton hook, automatic engine speed control, and double gear pto with direct mount heavy duty gear pump for manual trans. Maximum single line speed is 105 fpm.

Standard Features:

• Self-contained and sealed oil bath gearcase
• 18 gallon hydraulic reservoir
• In-Line cable weights
• Tower Load Status Gauge
• 2,000 Series Char Lynn hydraulic motor (for added efficiency)
• 1/2” plumbing and high pressure hydraulic hoses
• Outside left oriented control handles (increased cargo bay storage)
• 60” rear outrigger width
• Failsafe hydraulic braking
• Failsafe over-center hydraulic holding valves
• Extra high grade urethane paint

Optional Features:

• Sandreel
• Power to the rear
• Hydraulic wire winders
• Heavy duty tailgate
• Heavy duty pipe racks
• Front outrigger
• Hydraulic oil cooler